The efficient

Solar-Pellet

heating

Sujet

PELLEMATIC® SMART - solar pellet heating

 
Pellematic Smart - Solar Pellet System

3 in 1: Boiler, accumulator and installation on only 1.5 m2

  • 600 l. tank for hygienic domestic hot water.
  • Pellet burner with condensing technology, fuel savings of up to 15% year
  • Plug & heat
  • Integration of solar technology and freshwater station possible.

The Pellematic Smart from ÖkoFEN offers a new, extremely economical form of heating.

 

Pellet heating with solar technology

The unique combination of a solar and pellet boiler in one unit primarily makes use of solar power, but with a highly efficient, condensing pellet burner ready to step in when needed. This can mean savings of up to 50% in heating costs when compared to conventional pellet boilers.

 

The Pellematic Smart is also incredibly compact for a pellet boiler, needing only 1.5 m2 to install. The small footprint can be capitalised on especially in a new-build environment, where the boiler will integrate easily into a standard utility room.

 

Power ratings of our solar pellet systems

The Pellematic Smart pellet heating with solar technology and accumulator tank is available in the following power ratings:

  • 4 kW
  • 6 kW
  • 8 kW
  • 10 kW (NEW)
  • 12 kW (NEW)
  • 14 kW (NEW)

 

 

* In accordance with standard EN 303-5, the net calorific value of a fuel (energy content without energy held in the water) is used for calculating the efficiency. In calculations for condensing boilers, which can utilise the energy held in the water, this leads to efficiency levels of over 100%.

 

Installation examples

<strong>Flexi tank with vacuum suction system.</strong>
<strong>Storage room with vacuum suction system</strong>
<strong>Pellematic Smart  for hand filling</strong>
Practical complete solution

Practical complete solution

As well as cutting heating costs, the Pellematic Smart saves space and is simple to install. The pellet boiler, accumulator tank, pumps and pipework all fit into one compact unit that couldn’t be easier to commission - simply plug in and heat.
Your approved installer can also carry out any service and maintenance and has access to any components they need.

Low heating costs

Low heating costs

The Pellematic Smart is working to save energy in every way it can, taking energy from the sun and using integral condensing technology, which is supplied as standard. The condenser captures the heat in the flue gases that would otherwise be expelled up the chimney and lost, allowing the boiler to achieve a heat efficiency of 106% and reducing your pellet consumption.

Perfectly dimensioned

Perfectly dimensioned

Through its range of 4-12 kW, the Pellematic Smart is perfectly suitable for low-energy and passive houses.

Its sizing creates the up to now impossible: While the performance by "normal" boilers had to be throttled, the Pellematic Smart delivers even at very low energy requirements, maximum efficiency.

This protects the environment, saves pellets and thus money.

Extremely convenient

Extremely convenient

The technology of the Pellematic Smart extends beyond the boiler itself and into your hand in the form of an app for your smartphone, tablet or PC [01]. This gives you mobile access to your heating system settings whenever you have an internet
connection. Need the house to be warmer when you get home? Log in and tell the Pellematic Smart. The boiler can even notify you by email if the ash box needs to be emptied.

High power, low emmisions

High power, low emmisions

Opting for a Pellematic Smart not only means significant savings on heating costs, but you are demonstrating your care for the environment. The advanced condensing technology allows for a tremendous reduction in emissions.

Free energy

Free energy

The sun is an inexhaustible energy source, supplying a thousand times more energy than the world needs - free of charge and crisis-proof. The Pellematic Smart efficiently takes advantage of this, using the sun to provide most of your heat, with the integral pellet burner supplying additional heat only when required. It’s completely automatic - and very smart!

PELLEMATIC® SMART

 

Depending on requirements, the Pellematic Smart can be equipped with one or two heating circuits, solar heat exchanger and fresh water module.

 
600 l accumulator tank and pellet condensing boiler in one unit

600 l accumulator tank and pellet condensing boiler in one unit

  • for optimum pellet utilisation & solar for central heating and domestic hot water
 
Pellet condensing module for 106% efficiency

Pellet condensing module for 106% efficiency

  • provides comforting warmth whenever the sun doesn't shine
 
Pelletronic Touch programming unit for intuitive operation

Pelletronic Touch programming unit for intuitive operation

  • with a touchscreen display and self-explanatory graphics
 
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
Image enlargement

 

Pellematic Smart 4-8 kW  10-12kW
Boiler rated power kW 3,9 / 6,0 / 7,8 10 / 12 / 14
Efficiency - rated power % 100,0 / 103,0 / 106,1 105,9 / 105,6 / 105,3
Width - overall mm 1175 1175
Height - overall mm 1958 1958
Depth - overall mm 1150 1150
tilted height mm 790 790
Tilted height mm 1970 1970
DHW station delivery capacity 21 l/min at 60°C accumulator temperature and 45°C hot water temperature
Smoke tube diameter (at boiler) mm 132 (inner) 132 (inner)
Hopper volume kg 32 / 42 (hand filling)
 
Specifications - Download

New building

Confortable and cost effective heating

Refurbishment

A modern heating system proven many times over

Large scale projects

The potential called "efficiency"

Plumbers, Designers & Archtitects

As unique as the idea

GALERIE ÖFFNEN